All about the shutter of the rotary danfoss

Simple in the explanation

Let’s try to figure it out, in determining the reinforcing industry called “Disk shutter”. The disk shutter represents the type of reinforcement, which has a regulatory or locking element, which has a form in the form of a disk. In addition, it is worth noting that the disk shutter rotates around its axis, and is located perpendicular from the corner and towards the flow of the working area. From all that is written above, we can say that almost nothing is incomprehensible.

A little more

In the modern world, which is literally teeming with new and modern technologies in the field of equipment, the shutter of the rotary Danfoss has the ability to compete with a large number of valves, valves and other shutter systems. It follows that there are a number of these advantages. Firstly, these are not large in size and mass of equipment dimensions. Secondly, turning shutters have the opportunity to smoothly resolve the expenses of the external environment. Thirdly, the shutters have a fairly small time that is allocated to close and open the shutter. Fourthly, the shutters have low hydraulic resistance, and we can say that they are quite economical in terms of financial costs. Fifthly, this type of shutter has no need for the selection of special materials for the shutter body, which are necessary for use in working environments. Since in the process of contact with the immediate working area there is only a disk, and its compaction. It is worth noting that the most common material in the manufacture of rotary shutters is exactly cast iron. Sixth, in rotary shutters, which are made of cast iron of different brands, there are high tightness indicators. It is the tightness of the shutters that achieves through the use of seals that have elastic structures. In addition, it should be noted that during the installation of the rotary shutter, it is not required to use the additional seal of the flange material. It is also worth remembering that the rotary shutter will not need constant control by the equipment consumers, and will also not need constant maintenance. The reason for this is the absence of stuffing it up, and threaded pairs on a rotary shutter. In addition, it is also important that it is completely absent in the stagnant zone of the running part of the shutter, which will not allow the dirt and excess water.